PISCES INTERNATIONAL PLACEMENT CORP. POEA LICENSE No: 035-LB-021612-R (JOB HIRING for OVERSEAS)

MAIN OFFICE: Unit 101 (F) 8284 Dr. A. Santos Ave., San Dionisio, Sucat Road, Parañaque City

Telephone Nos: 825-6599 / 820-0399 Cellphone Nos: 0922-821-8036 / 0922-821-8034

E-mail Address: recruitment@pisces-jobs.com  website: www.pisces-jobs.com  

Branch Offices:  CAGAYAN DE ORO : JMC Bldg., J.V. Sereña St., Carmen Cagayan de Oro City

Telephone / Cellphone No: 088-858-6765 / 0922-821-8035

CEBU : 2nd Floor Albulario Bldg. General Maxilom Ave., Cebu City

Telephone / Cellphone: 032-266-9225 / 09165830323; 09228218032; 09387469431

DAVAO :2/Flr. Unit 6 & 7 RC Bldg., G. de Guzman St. Davao City

Telephone / Cellphone No: 082-221-5113 / 0922-821-8033

BACOLOD : ESJ Center Bldg. 2nd Flr. Room 207 Burgos St  Brgy. Villamonte, Bacolod City

Telephone / Cellphone No: (034) 435-2988 /

URGENT JOB OPENINGS

As of 02 August 2013

DETECON AL SAUDI COMPANY (Accre. # 10189436) - Riyadh, K.S.A.

ELECTRICAL ENGINEERS (POWER) – with more than 5 years experience in the field of generator and low voltage / high voltage (LV/MV) panels and power transformers.  Candidate shall have sufficient experience in automatic generator control system and distribution panels.

HR OFFICER (Male) – Master’s or bachelor degree in Business Administration. Must have good written/oral communication skills. Min. 7 years experience in the field of Human Resources, all-around experience in HR field (management of i.e. payroll, recruitment activities, development of salary structure , able to organize training sessions).  Preferably with working experience abroad. Computer literate & w/ driving license.     

OSP INSPECTORS           FO CABLE TECHNICIANS                           COPPER CABLE TECHNICIANS

DIESEL TECHNICIANS                                       AIR-CON TECHNICIANS        CONTROL TECHNICIANS

MONITORING TECHNICIANS                               SDH TECHNICIANS            DRAFTSMEN

YUKSEL INSAAT A.S. (Accre. # 10108662) - Riyadh, K.S.A.

SWTS Project

CIVIL ENGINEER- w/ knowledge in Total Station and CADD            

ELECTRICAL ENGINEER – w/ experience in tendering      SURVEYORS                      JR. SURVEYORS

MOBILE CRANE OPERATORS                  SIDE BOOM OPERATORS            HEAVY TRUCK DRIVERS

TRAILER DRIVERS        HI-AB/BOOM TRUCK OPERATOR                           LOADER OPERATORS                  EXCAVATOR OPERATORS

STOCK CLERK (3) – With previous experience in warehouse stock keeping job. At lease high school graduate. Between 25-30 years old.

ALKHALEDIAH AGRICULTURAL COMPANY (Accre. # 1083616746)

 - Riyadh, K.S.A.

A B S O L U T E L Y   F R E E   P L A C E M E N T   F E E

COMPUTER ENGINEER (2) – Basic degree in Computer Engineering, Electronics or similar discipline. Minimum experience of 3-5 years in Technical Support, Help Desk or Customer Services. Preferred A+ or MCP Certificates. Computer literate and knowledge, PC hardware, systems software and other devices. Excellent command of English Language (written, spoken, etc). Has a valid driving license (optional)

KITCHEN & LAUNDRY EQUIPMENT TECHNICIAN – High School graduate, 2 years experience in the maintenance, operation, installation & troubleshooting of Kitchen & Laundry equipment such as dish washer, hood, hot plate, oven, range cooker, tilting pan, Yemeni burner, meat cutter, salamander, coffee machine, hot cabinet, washing machine, tumble drier, flat iron, stem press machine and central gas tank. 

PLUMBER – Minimum 7 years experience working as a plumber, preferably a holder of an accredited technical school diploma in the plumbing field. Capable of reading, writing and speaking English and capable of interpreting manufacture’s technical data. Capable of reading drawings and posses the ability to operate, repair and maintain equipment/appliances as per manufacturer’s specifications. Must be knowledgeable of appropriate safety measures and capable of implementing them as required.               

AL YAMAMA COMPANY for TRADING & CONTRACTING (Accre. # 10128703)

– Dammam, K.S.A.

A B S O L U T E L Y   F R E E   P L A C E M E N T   F E E

HEAVY DUTY DRIVERS

SAUDI PIONEERS for SPECIALIZED SERVICES Project

MALE SECRETARY – min. 2-3 years experience in the same capacity.  25 to 35 years old.

SCECO Project

MALE SECRETARY – min. 5 years relevant work experience, 25-35 years old                

COMPUTER PROGRAMMER (Male) – 25-35 years old, min. 5 years related work experience

ROAD SECTION Project

CIVIL ENGINEER CONSTRUCTION MANAGER – BSCE graduate, 10 years experience in Road construction and maintenance field with knowledge of Material classification & inspection

SITE ENGINEER – BSCE graduate, 5 years experience in Road construction and maintenance field with knowledge of Material classification & inspection

QC ENGINEER – BSCE or Geology graduate,  5 years experience in Laboratory test and filed inspection of Materials of Road construction and maintenance

LAB QC TECHNICIAN – Diploma in Civil or Soil and Asphalt tests. 5 years experience in Laboratory test and filed inspection of soil and Asphalt tests  for Road construction and maintenance  

PLANNING AND SCHEDULING ENGINEERS – BSCE graduate and Certificate in Primavera,  3 years experience as planning engineering in large construction project.

ARAMCO NPOC O&M Project

ADMIN CLERK – College Level/Graduate or Secretarial vocational course. Minimum of 3 years’ experience in same field, good in English oral and written, well inverse with Microsoft office.

BUILDING INSPECTOR – Associate Degree in BS Engineering (Civil, Electrical, Mechanical). Minimum of 4 years’ experience in practical practice, construction, maintenance and operation and building systems.

ARAMCO Project

AUTOCAD/DRAFTSMEN

SADEEM AGRICULTURAL CO. (Accre. # 10204705) - Riyadh, K.S.A.

ROYAL COMMISSION JUBAIL - PROJECT S12

OPERATION MANAGER – Shall have experience in Irrigation Systems operation, maintenance and construction and in all services related to main distribution pipe works, pumping stations mechanical and automation operation, SCADA operation and associated Irrigation system RTU/Controllers and solenoid valves. Both Academic and Professional Qualification are essential and a degree in Civil, Mechanical Engineering is required. At least Ten (10) years of recent experience should be in responsible management positions in the operation field with 5 years at level equal to the responsibilities of this position. The Manager shall be fluent in written and spoken English.

(TSD) TECHNICAL SUPPORT MANAGER –Should have a Bachelor Degree in Engineering (Civil / Landscape). He should have a minimum of seven years experience in construction, including civil works, irrigation and electrical works and six years experience should be as a manager. Preferably he should speak in both Arabic and English with knowledge in basic language software like M.S. Excel, M.S. Word and Microsoft project management, internet explorer & M.S. Application, knowledge & Experience in ERP System is advantage.

PIPE BREAK SUPERINTENDENT –Shall have experience and ability in planning, interpret engineering drawings, organizing, staffing, coordinating, instructing and supervising the operation and maintenance of all equipment and facilities under his responsibility. The superintendent shall have thorough knowledge in design principle of the equipment and the facilities under their control. All Superintendents shall have a bachelor's degree in engineering or equivalent in their respective fields and shall have a minimum of eight (8) years prior experience in the area of assigned responsibility including five (5) years supervisory.

VFD EXPERT – Diploma holder in Electrical and Electronics Engineer, have 5 to 7 years experience in troubleshooting centralized SCADA System, PLC based control, basic for Process Control and associated Instruments.  Should have knowledge in installation , calibration, trouble shooting and maintenance of pump station automation controls, remote

terminal units associated irrigation solenoid valves and other types of actuator valve. Adequate knowledge in process control instrumentation is essential.

ROYAL COMMISSION JUBAIL - PROJECT S27

(TSD) TECHNICAL SUPPORT MANAGER – Should have a Bachelor Degree in Engineering (Civil / Landscape). He should have a minimum of seven years experience in construction, including civil works, irrigation and electrical works and six years experience should be as a manager. Preferably he should speak in both Arabic and English with knowledge in basic language software like M.S. Excel, M.S. Word and Microsoft project management, internet explorer & M.S. Application, knowledge & Experience in ERP System is advantage.

LANDSCAPING MANAGER – Should have a Bachelor of Science in Agricultural Engineering or higher Degree in landscape horticulture. He should have a minimum of seven (7) years experience in a supervisory position in the field of grounds and landscaping operation and maintenance with knowledge in irrigation system and six (six) years as a manager. Preferably he should speak in both English and Arabic knowledge basic language software like M.S. Excel, M.S. Word and Experience in ERP System is advantage.

should have a knowledge in computer software like EXCEL, WORD and Microsoft practical Experience.

LANDSCAPING SUPERINTENDENT (2) – Should have a Bachelor's Degree in Agricultural Engineering. He should have a minimum of six (6) years experience of grounds and landscaping in an environment similar to that in the Arabian gulf region; three years in a supervisory position is essential. He should have knowledge in computer software (Internet Explorer & MS application). Knowledge in ERP system would be an advantage. He should read, write and speak in the English language. With sanitation supervisory experience.

CRAFT & TRADE SUPERVISOR – BS Civil Engineering graduate, 3 years experience in supervision of construction work

QUALITY ASSURANCE SPECIALIST – BS Civil Engineering graduate, 5 years experience in planning, development, and regulatory system 

PEST AND DISEASE SPECIALIST – BS Agriculture graduate, 5 years experience in controlling pest and other plants diseases

IRRIGATION ENGINEER- BS Civil and Irrigation Engineering graduate, 5 years experience in irrigation and construction

YANBU PROJECT

PEST CONTROL SUPERVISOR  PEST CONTROL TECHNICIAN  LAWN AREA SUPERVISOR

O&M SUPEVISOR - Irrigation (2)               O&M SUPEVISOR - Landscaping (2)         

LS & IRR SYSTEMS DRAFTSMAN (2)                      FOREMAN LS & IRR (2)

IRRIGATION TECHNICIAN                         ELECTRO-MECHANICAL TECHNICIAN (2)

H.E. OPERATOR (4)                        QC LS INSPECTOR                         LABORER (5)                    

AL HAJRY OVERSEAS (Accre. # 10201082) – Dammam, K.S.A.

PROJECT DIRECTROR                 SUPERVISOR (2)               PERSONAL COMPUTER OPERATOR

HORTICULTURIST                         EQUIPMENT TECHNICIAN                         COURIER (15)

QC MANAGER/ENGINEER                          SAFETY ENGINEER/SUPERVISOR

SAUDI ARABIAN PACKAGING INDUSTRY (Accre. # 10138799) – Dammam,   K.S.A.

TECHNICAL ENGR. (BSME) – Minimum 4 years experience in Manufacturing; Can Making or similar Industry experience will be an advantage competency. Experience in setting up and maintaining an ERP System’s BOM’s and Routings and Consumption. Mechanical Engineering graduate. Very good knowledge in Excel, Word, AUTOCAD 2D-3D (CADCAM). Fluent in English Reading, Writing & Communication. 28 – 45 years old

PAPER PRINTERS  (for re-training as METAL PRINTERS) – Age: 22-35 years old. Minimum High School, Candidates having a Diploma in Printing Technology or completed a full apprenticeship with leading print house will be given preference. English speaking, basic reading & writing. Must have minimum 5years experience as a Lead Printer on large format multi-colour presses. Candidates with previous overseas experience and/or having experience on KBA RAPIDA printing presses will have an added advantage.

ELECTRICIAN (2) – Basic Qualification: Technical Trade/Diploma in Electrical & Electronics. Age : 25 – 45

Experience:   4-5 years in a Manufacturing Industry, preferably in Can Manufacturing/Packaging/Metal sheet printing machines. Hands-on experience in trouble shooting of machines controlled by VSDs, PLCs, Servo Controllers. Basic knowledge in PLC logic circuits and diagrams, preferably SIEMENS S7 series, hydraulic and pneumatic controls.

PRODUCTION SUPERVISOR                       ASST. PRINTERS                                              MACHINE OPERATOR

SABER ALUMINUM & DECORATIVE GLASS FACTORY (Accre. # 10230245) –

Riyadh, K.S.A.

INTERIOR DESIGNER (1)                               ELECTRO-MECHANICAL TECHNICIAN (1)         CNC OPERATOR (2)

GLASS LAMINATION LINE OPERATOR (1)           STAINLESS STEEL FABRICATOR/WELDER (1)

GLASS FIXER (1)                               DRAFTSMAN (2)               DUCT FABRICATOR/INSTALLER/FIXER (2)

A/C TECHNICIAN (1)                        ALUMINUM FABRICATOR (1)

VIDEO HOME & ELECTRONIC CENTRE (Accre #10100866) – Doha, Qatar

A/C TECHNICIANS

MEP DIVISIONAL MANAGER (Construction) (1) – BE (Mechanical or Electrical Engineering) from a recognized university. He should have 15-20 years+  experience and should have executed, all types of  MEP and Air Conditioning projects. The services include HVAC, Electrical, Plumbing, Fire Alarm and Fire fighting services.  He should be able to independently lead the MEP Construction Division including a team of engineers and handle multiple projects and be totally responsible for their erection, testing, commissioning and handover to the satisfaction of the customer. Well conversant with Commercial aspects of Contracting Business. A valid GCC car driving license would be an advantage.

SENIOR ELECTRICAL MANAGER (1) –BE (Electrical Engineering) from a recognized university. He should have at least 12-15 years of total experience in Electrical Building services for the Construction industry.  He should have worked in GCC countries carrying out, design, supply and installation works for Electrical services, for well known Electrical/MEP contractors in the Gulf. He should be able to independently lead a team of electrical engineers to completely Estimate Design, ,install, commission and hand over projects being handled by the Electrical department. He should have a valid GCC car driving license and be able to join the company at short notice.

SENIOR AIR CONDITIONING PROJECT MANAGER (1) – BE (Mechanical Engineering) from a recognized university. He should have 12-15 years field experience and should have executed, all types of Air Conditioning projects using Chillers, DX & VRF equipment. He should be able to independently lead a team of Air conditioning engineers and handle multiple projects and be totally responsible for their erection, testing commissioning and handover to the satisfaction of the customer. A valid GCC car driving license would be an advantage.

PLANNING MANAGER (HVAC) (1) – BE (Mechanical Engineering) from a recognized University. He should have 8-10 design/planning experience and should be familiar with, all types of Air Conditioning projects using Chillers, DX & VRF equipment. He should be able to independently design and plan, multiple projects and be totally responsible for their approvals/ordering with consultants/Clients/Vendors. A valid GCC car driving license would be an advantage.

PROJECT MANAGER (ELV SYSTEMS) (1) – BE (Electronics/electrical) from a recognized university. He should have minimum of 6-8 years experience of having installed and commissioned CCTV, Access control, Public address, AV and Fire Alarm systems. He should be fully conversant with all types of ELV systems including loading of their software, trouble shooting etc. to ensure proper installation, commissioning and Hand over. Valid GCC car driving license would be an advantage.

SAUDI CRANES & STEEL WORKS FACTORY (Accre. # 9426260) –

Jubail, K.S.A.

PLANNING ENGINEER – Degree or Diploma in Mechanical Engineering. 5-7 years experience in steel fabrication industry. Extensive knowledge of Microsoft Project and/or Primavera software program.

AUTOCAD OPERATORS – Diploma in draftsmanship. Computer literate, including other relevant software packages. Must possess a minimum of 5 Years of practical Experience in designing & engineering works rendered in any industrial manufacturing company. Well familiar with AutoCad (latest version) and knowledge in Micro-station, Autodesk Building Services (ABS) • Skills in Drawing / Designing / Calculating / Checking specifications & drawings / Collecting Information.

ELECTRICIAN (5) – Work experience of 3 to 5 years with prior completion of vocational training for electrical wiring methods and practices. Ability to read electrical circuit diagram and work accordingly. Ability to identify component layout and wiring on power control systems. Thorough knowledge of electrical hazards & and safe work methods. Thorough knowledge of using electricity measuring instruments & tools with good clean habits of maintaining them. Should know the basic principles of operation of drive control system for AC motors. Ability to make quantitative estimation of component requirement in respect to electrical circuit diagram for construction of control panels. Ability to carry out electrical site works assignments and fills assessment reports for trouble shooting and maintenance. Ability to carry out electrical maintenance assignments at sites under difficult working conditions. Knowledge of ISO series quality standard guidelines & requirements.

STEEL FABRICATOR (5) – Able to understand Fabrication Drawings. Knowledge of Welding and understanding of Welding practices, and welding symbols. Fabrication Experience in Structural Steel is a must. Knowledge of Fabrication practices and reduction of distortion levels during fabrication. Familiar with Industrial Fabrication and mechanical tools and their usage. Knowledge of Marking / Cutting / Tack welding / Fitting as per drawings. Knowledge of Steel material/Grades, and their heating and bending practices  

OVERHEAD CRANE TECHNICIAN (Electrical) (5) –  3-5 Years full time experience in crane manufacturing company. Hands on experience on Various cranes : EOT cranes/ Gantry cranes/JIB Cranes/Hoists. Field Experience - Installation and commissioning. Good command over crane wiring diagrams / Crane controls and trouble shooting. Mechanical Assembly knowledge and repair assessment experience are added advantage.

MIG WELDER –  MUST BE CERTIFIED 3G WELDER (5) – with minimum 3 Years of Experience ITI  Holder. Must be able to work on MIG Machine. Able to operates manual or semi-automatic welding equipment to fuse metal segments using processes such as MIG, gas metal arc (GMAW) and stick and shielded metal arc (SMAW). Able to weld metal parts as specified by layout or welding diagram (blue prints, engineering drawings and weld specifications), Fabricate and assemble fixtures, tooling, shop aids and other devises as required for special projects, ensure quality of welds and rework as required. Preparing work and assist in performing welding tests as required by the inspection section. Perform basic troubleshooting of weld machines and accessories as required. Maintain and support equipment records and repair history. Perform routine maintenance on welding and cutting tools and equipment, reporting defects (if any) to the supervisor. Knowledge of general welding practices, techniques  and reduction in distortion levels during fabrication. Knowledge of Steel Material / Grades and their heating and bending practices. Complying with all Health, Safety and Environment as well as work permit, policies and procedures. Performs other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment. Perform housekeeping activities for maintaining the welding areas in neat and tidy.

CENTRAL PLANT SERVICES (CPS) – Dammam, K.S.A.

INDUSTRIAL ELECTRICIAN and MECHANICAL TECHNICIAN – with motor gearbox experience

ALKHURAIJI FACTORY for PERFUMES & COSMETICS (Accre. # 10230466) 

Riyadh, K.S.A.

GRAPHIC DESIGNER

SAUDI TUMPANE CO. (Accre. # 10103484)– Riyadh, K.S.A.

CIVIL DRAFTSMAN                        MECHANICAL DRAFTSMAN

ELECTRICAL DRAFTSMAN                       DUCTING DRAFTSMAN

MOHD. A. AMMU & PARTNER CO. (Accre. # 10206031)– Dammam, K.S.A.

CUTTING & BENDING MACHINE OPERATOR   STEEL FABRICATORS

AL-MUGARRY MANPOWER RECRUITING OFFICE (Accre. #1001374535) – Dammam, K.S.A.

A B S O L U T E L Y   F R E E   P L A C E M E N T   F E E

HOUSEMAIDS                   FAMILY DRIVERS                           COUPLES            GIFT WRAPPER (Female)

KOMEAL SELECTORS TRADING – Dammam, K.S.A.

ELECTRICAL ENGINEER – Have knowledge in basic elevator components and electrical connection.  Have knowledge in basic elevator wirings.

UNIVERSAL TECHNICAL SERVICES CO. - UTESCO (Accre. # 10230981)  – Dammam, K.S.A.

WELDER (2)                       STEEL FABRICATOR (2)                              ELECTRICAL TECHNICIAN

 GERMAN TECHNOLOGY AUTO SERVICE (Accre. # 10224101)  – Dammam, K.S.A.

AUTO TECHNICIAN – from MB and BMW. Experience 8 years in MB and/or BMW. Age: less than 40. Experience in overhauling of engine and transmission. Good experience in diagnosis. He should be able to troubleshoot using diagnostics equipments of MB and BMW. Work as a team leader. Good spoken and written communication skills in English.

AUTO TECHNICIAN – from MB or BMW. 5- year experience. Age : 35 or less. Have an idea in diagnosis and troubleshooting. Good spoken and written communication skills in English.

PAINTING & DENTING SUPERVISOR – less than 45 years old, good leadership skills, good communication skills both oral & written, has at least 10 years work experience in painting & denting. Has worked as painting supervisor for at least 5 years.

AUTO DENTER – 7 year experience , worked on chassis alignment , welding and fabrication. Age: less than 40.

AUTO PAINTER – 7 experience in preparing- spraying- mixing - and can work as painting quality controller. Age : less than 40.

REFUSE EQUIPMENT MFG. CO. – Riyadh, K.S.A.

AUTO ELECTRICIAN (2) – Diploma holder. Minimum 5 years experience in Electrical & Mechanical maintenance of equipment & vehicle

MECHANICAL HYDRAULIC MAITENANCE TECHNICIAN (4) – Diploma holder. 5 years experience in maintenance of mechanical & hydraulic equipment, has experience in refuse equipment manufacturing.

ELECTRIC EQUIPMENT MAINTENANCE TECHNICIAN (3) – Diploma holder, min 5 years experience in maintenance of electrical and mechanical equipment and electrical circuits.

QUALITY ENGINEER (2) – Bachelor degree, 5 years experience. Has experience in refuse equipment manufacturing like Garbage Compactors, Dumpers, Vacuum Tanks, Jetting Tanks, Aerial Lefts, Containers & Water Tanks. Has experience in fabricating iron tanks & boxes.

ELECTRONIC TECHNICIAN – Diploma holder. 3 years experience in diagnosis & repair of electronic circuits related to hydraulic systems. Has experience in refuse equipment manufacturing.

TEMPLATE DESIGN ENGINEER – Bachelor degree holder. 10 years experience designing template which will be used in production process. Design, model & test prototypes for products. Conduct research & create design proposals for projects. Establish design briefs. Create concepts, performance & production criteria.

TEMPLATE TECHNICIAN – Diploma/Bachelor degree holder. 7 years experience in executing designed template to haste process of production. Familiar using measurement instruments & calibration. Full knowledge of the types of machinery on which templates are installed by & methods of operation. Has experience in fabricating iron tanks & boxes

MECHANICAL PRODUCTION ENGINEER – BSME graduate. 10 years experience. Has experience in refuse equipment manufacturing. Has experience in fabricating iron tanks & boxes. English language skills are essential. Good user of computer & good background about engineering programs.

GEOMETRIC DRAFTSMAN (2) – Diploma/Bachelor Degree holder. 10 years experience. Responsible for engineering drawings for products. Design, model & test prototypes for products.

ELECTRICAL ENGINEER – Bachelor Degree in Electrical Engineering. 5 years experience. Design, develop and maintain electrical control systems & have experience in electrical & mechanical maintenance of equipment. Has experience in refuse equipment manufacturing companies.

AL-SARRAF TRADING  – Dammam, K.S.A.

DELIVERY DRIVER – must have work experience in the same capacity in Dammam, KSA

SALMAN CO.  – Al-Qassim, Buraydah, K.S.A.

IT MANAGER – Bachelor Degree or Higher IT Field equivalent. At least 10 years experience in IT. MBA is a plus. Fluent in English. Excellent in PC skills

ELECTRICIAN – Certified from TESDA. At least 3 years experience in electrical maintenance. Fluent in English. Knowledge in PC

MECHANICAL TECHNICIAN –Intermediate or Over Intermediate Certificate. At least 3 years experience in mechanical maintenance. Fluent in English. Knowledge in PC

PLC ENGINEER – PLC Engineering Certificate. At least 3 years experience in PLC. Fluent in English. Excellent in PC Skills

CAR ELECTRICIAN – Intermediate or Over Intermediate Certificate. At least 5 years experience in car electrical maintenance. Fluent in English. Excellent in PC Skills

LAYER CAKE BAKER –Intermediate or Over Intermediate Certificate. At least 10 years experience in Layer Cake production Industry. Fluent in English. Excellent in PC Skills

PASTRY BAKER – Intermediate or Over Intermediate Certificate At least 10 years experience in Pastry production Industry. Fluent in English. Excellent in PC Skills

ADDRESS CAFE  CO. – Riyadh, K.S.A.

BARISTAS/WAITERS (4)

GULF CO-OPERATION SYMBOLS (Accre. # 10072701)  – Dammam, K.S.A.

PLANNING ENGINEER (Civil) – 5-7 + years as Advance Planners using Primavera P6 (NOT P3). Ability to create a Level 4 breakdown schedule. Assign Resources, Sequences, Cost, etc. Excellent Knowledge in Microsoft Excel specifically and MS Office. Excellent command of the English Language. Excellent communication skills. Excellent Reporting Skills (for daily, weekly, and monthly reporting)

RO OPERATOR – Experience 03-05 years in RO Plant operations. Diploma or secondary school or equivalent. Experience with sea water and brackish water RO Plants, (degassers, high and low pressure pumps, membranes, sand filtration, cartridge filtration and etc.). Have acknowledge in all types of chemicals used in RO Plant (pretreatment and post treatment). Monitoring all instrumentation systems and preparing all reports. Good command in English language 

STP OPERATOR – Experience 03-05 years in STP Plant operations. Diploma or secondary school or equivalent.. Experience with Activated sludge and MBR Systems Plants, (bar and drum screens, equalization tanks, aeration tanks, aeration air blowers and diffusers, MBR tanks , membranes ,chlorination systems, sludge recycle systems, pumps, valves and etc). Have acknowledge in all types of chemicals used in STP Plant. Monitoring all instrumentation systems and preparing all reports. Good command in English language.

GENERATOR MECHANIC (2)                     SAFETY MANAGER (2)

RAYAN GULF (Accre. # 10091679)  – Jubail, K.S.A.

MALE ACCOUNTANT (2)              CIVIL ENGINEER (3)                      MECHANICAL ENGINEER (3)

ESTIMATION & PLANNING ENGINEER (3)                          CARPENTER (3)              

FABRICATOR (3)                             WELDER (3)

ELFIT ARABIA TELECOM CO.  – Riyadh, K.S.A.

DIESEL & HYDRAULIC MECHANIC (2) – Minimum 5 years experience in the same capacity specializing in Winch Machine, not more than 40 years old.

DAR AL-ANGAWI  – Burayda, K.S.A.

ELECTRICIAN  (2) - Knowledge in air conditioned works and has knowledge in driving pick up car.          

PLUMBER (2)

COMMUNICATION SOLUTIONS CO. (Accre. #10146473) – Riyadh, K.S.A.

HEAVY EQUIPMENT MECHANIC - for Caterpillar & Bobcat, with experience in Saudi Arabia

FIBER OPTIC SPLICER (2)                          CAD OPERATOR (2)

DOUH COFFEE SHOP (Accre. #10220056)  – Riyadh, K.S.A.

WAITER

SIRIUS STAR (Accre. #10180251)  – Riyadh, K.S.A.

CONTROL VALVE TECHNICIAN – 5 year experience in overhauling of control valve at work shop & site. Qualification : Diploma in Engg. or ITI

MOV TECHNICIAN – 2-3 years experience in servicing of electrical actuator for valve. Like : Biffi actuator, rotork actuator, limitorque actuator, auma actuator, etc. Qualification: Diploma in Engg. or ITI

PIPE TESTER – 5 years experience in testing of all kinds of plant piping. Qualification : ITI

SEAS of TECHNOLOGY  – Al-Khobar, K.S.A.

TELECOM TECHNICIAN (1) – above 5 to 7 years experience, shall have work experience in IT telecom rooms in Industrial environment (they will work for projects): rack/cabinets/hardware/UTP and fiber structure cabling and connectivity/ electrical work related to this (grounding, AC/DC panels, rectifiers…)  ELECTRICAL ENGINEER (1) – shall be capable to propose a technical solution based on a customer RFQ or functional specification, shall have experience in bidding and design, shall be able to supervise an operational team of technicians during work implementation.

COST ACCOUNTANT                     QA/QC ENGINEER

AL MAWARID RECRUITMENT CO.  – Riyadh, K.S.A.

CHEF DE PARTIE (4)                      PASTRY COMMIS (5)                      BAKERY COMMIS (5)                    BARISTA (4)

WAITER (25)                      HEAD WAITER (2)                           KITCHEN COMMIS (5)                  COUNTER SALES (10)

FAMILY DRIVER (15) – must have GCC license

ALWSTAH UNITED TRADING & WIRE FACTORY  – Riyadh, K.S.A.

MAINTENANCE ENGINEER – Candidate will be responsible for making sure machinery and equipment runs smoothly in factory. Candidate will work in wire factory in manufacturing and production. Duties will involve: Organizing routine servicing schedules and making scheduled checks on machinery and parts Checking and calibrating machines to make sure they are accurate. Fitting new parts and installing new machines. Carrying out quality inspections on machines. Responding immediately to equipment breakdowns. Fixing faults or arranging for replacements to be installed. Keeping production managers informed of progress. Finding and fixing faults and recalibrating machines. Oiling and cleaning machinery and parts. Overhauling and replacing parts according to schedule. Responding immediately to machinery breakdowns. As a fitter, candidate will service and repair the equipment. And could work on mechanical, electrical, hydraulic, pneumatic or computerized systems. Prefer candidates with experience in Wire Drawing Machine, Common Nail Machines, Wire Cloth Hanger Machines, Wire Mesh Machines, Wire Furnaces and Wire Galvanization Machines

AL JAZZAR CONSULTING ENGINEERS (Accre. #10162552) - Riyadh, K.S.A.

MALE SECRETARY – Degree/Preperably Bsc. Computer Science, Gender : Male, Age : 20 to 45 yrs. old, Experience : Minimum 2yrs. know how to use MS Office, Excel, Word, Powerpoint and most importantly Photoshop and Autocad

AL JAZEERA INT’L. ACADEMY  – Riyadh, K.S.A.

ENGLISH TEACHERS – Male, Bachelor Degree Major in English Education with at least 5 years experience; or Masteral Degree & Bachelor Degree Major in English Education with at least 3 years experience.

AZMEEL CONTRACTING  – Riyadh, K.S.A.

CIVIL/STRUCTURAL CAD OPERATOR (15)                         QA/QC ENGINEER (10)

DOCUMENT CONTROLLER (2)                 PLANNING ENGINEER (2)

FEMCO  – Riyadh, K.S.A.

PLANNING ENGINEER – Any Engineering degree using PRIMAVERA 6 or more with at least 10 to 15 years of experience in construction scheduling.

MECHANICAL ENGINEER – BS Mechanical Engineer with 10 to 15 years of experience in Industrial, Commercial, Piping, Power Plant Project (Ex-Saudi)

ELECTRICAL ENGINEER – BS Electrical Engineer with 10 to 15 years of experience in Industrial, Commercial, Piping, Power Plant Project (Ex-Saudi)

PIPE FITTER                     HVAC TECHNICIAN                       RO. PLANT TECHNICIAN            PUMP TECHNICIAN

GULF STEEL FACTORY – Dammam, K.S.A.

SALES ENGINEER – preferably a mechanical engineer with working experience in Saudi Arabia and a valid driving license.

FIRST MANUFACTURING CO. (FMC) – Riyadh, K.S.A.

MOULD DESINGER (1) – 24-45 years old. Mechanical Engineering graduate. 5-10 experience as a Mould Designer of a Injection Mould and Extruder die heads Moulds. Particularly in Plastic fittings would be in advantage. CAD/CAM, Solidworks, PROE, AUTOCAD, etc.., proficiency and other related software application preferred. Knows on hand on operation of all machines used in workshop flat form(i.e CNC, Milling, EDM, etc…). Good personality and Hardworking attitudes. Good in English speaking and writing/Arabic would be advantage.

MOULD SETTER (1) – 24-38 years old. Secondary graduate or Technical graduate. 3-5 years experience as a mould setter of a Injection machines and Extruder Die Head machines, Preferably in Plastic pipes and fittings production. Should have an experience of hands on Operation of Injection machines and Extruder machines. Good personality and hard working attitudes. Good in English speaking and writing/Arabic would be advantage.

   

MOULD FABRICATOR (2) – 24-38 years old. Technical graduate or Engineering graduate. 3-5 experience as a Mould maker or Mould assembly of a Injection Mould and Extruder die heads Moulds. Particularly in Plastic fittings would be in advantage. CNC programming knowledgeable(i.e FANUC,SIEMENS) Preferably knows in hands on operation of all machines used in workshop flatform(i.e CNC, Milling, EDM, etc…). Good personality and Hardworking attitudes. Good in English speaking and writing/Arabic would be advantage.

PLUMBER (2) – 24-38 years old. Secondary graduate or Technical graduate. 3-5 years experience as a building plumber, installation and repairing of pipes system, Particularly in PPR pipes and fitting installation would be advantage. Good personality and Hardworking attitudes. Good in speaking /writing in English/Arabic would be advantage.

EXTRUDER OPERATOR (1) – 24-38 years old. Secondary graduate or Technical graduate. 3-5 Years experience as a Operator of Extruder Machines preferably in plastic pipes products. Good personality and hard working attitudes. Good in English speaking and writing/Arabic would be advantage.

INJECTION OPERATOR (3) – 24-38years old. Secondary graduate or Technical graduate. 3-5 Years experience as a Operator of Injection machines preferably in plastic pipe fittings products. Good personality and hard working attitudes. Good in English speaking and writing/Arabic would be advantage

ALL QUALIFIED APPLICANTS MAY APPLY PERSONALLY WITH 2 SETS OF COMPREHENSIVE RESUME, DIPLOMA, CERTIFICATE OF EMPLOYMENT, SEMINARS / TRAININGS  ATTENDED, 4 PCS. 2X2 PICTURE (white background) ORIGINAL PASSPORT/NBI & OTHER CREDENTIALS.

FOR MANPOWER POOLING ONLY NO FEES TO BE COLLECTED.

BEWARE OF ILLEGAL RECRUITERS.